VEHICLES - Shop
PLEASE READ:
All of our models are 3d printed resin (or cast pewter). Like all resin products these models should be treated carefully.
Dont breath the dust (wear a mask) if sanding) wash hands after handling (or wear gloves). Don't lick or otherwise ingest the models or parts.
If the model feels sticky it will be residue Isopropanol and resin sludge that should be washed off using IPA 99% or Acetone (suspend the model in the IPA for 10 mins) and/or leave in bright sunlight for an hour or longer (the UV light hardens the resin).
We recommend spraying the model with car primer all over the model before painting to seal the surface.
The following link is to the manufacture of the resin which is
used for home printing. We use the Grey or Clear resins.
https://formlabs.com/materials/standard/#clear
